1.  Main Advantages of Press Fittings:

● Quick and safe installations

● Excellent corrosion resistance

● Reduced labor requirements

● Easy handling and light weight

● Dependability, even under severe use conditions

● No fire-watch requirements

2.  Product Specification:

3.  Accessory:

  EPDM O-ring

4.  Application：

1）Potable Water

2）Hydronic Heating

3）Chilled Water

4）Compressed Air

5）Vacuum

6）Oxygen, O2 (non medical)

 
5.  1/2” to 2” Installation Instruction:

1) Cut copper tubing at right angles using displacement-type cuter or fine-toothed steel saw.

2) Remove burr from inside and outside of tubing to prevent cutting sealing element.

3) Check seal for correct fit. Do not use oils or lubricants.

4) Mark proper insertion depth on tubing.

5) While turning slightly, slide press fitting onto tubing to the marked depth.

6) Insert appropriate jaw into the pressing tool and push in,holding pin until it locks in place.

7) open the jaw and place at right angles on the fittings. Visually check insertion depth using mark on tubing.

8) Start pressing process and hold the trigger until the jaw has engaged the fitting.

9) After pressing, the jaw can be opened again.

6.  Recommendations:

 Fada Lead-free Brass Press 90°Elbow, P x FPT - 3/8"

     Fada Lead-free Brass Press 90°Elbow, P x FPT - 1/2”

     Fada Lead-free Brass Press Drop Ear 90°Elbow, P x FPT - 3/4”

7.  Frequently Asked Questions:

     Q: What does EPDM stand for?

     A: Ethylene-Propylene Diene Monomer

 Q: What are the most common errors made when installing s Press Fittings?

     A: Not adequately deburring the end of the tubing, and not inserting the tube far enough into the press fitting.

 Q: For what types of tools is appropriate for Bada Press Fittings?

     A: Compatible with most common pressing tools and jaws in the market