1.Product Introduction:

The Fada® Bronze Press Series features an inboard EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds, with no flame, solder or flux. It helps installers across the world reduce installation time, save money and increase reliability on the job site.

 
2.Product Specification:

 
3. EPDM sealing element:

Operating temperature: 0°F to 250°F (-18°C to 120°C)

The EPDM sealing element has particularly good resistance to hot water, making it ideal for seals and gaskets in heating systems, fittings and household application (e.g. washing machines, pumps, dishwashers).

 
4. Press Series Products:

● Including couplings, elbows, tees, adapters

● Extensive offering of reducing tees

● Leak detection feature identifies un-crimped connections

● Compatible with most common pressing tools and jaws in the market

● EPDM seals can be factory-installed &lubricated or by customers.

● Packaged in common industry quantities.

 
5. Installation Instruction:

1.Check seal for correct fit. Do not use oils or lubricants.

2. Mark proper insertion depth for well sealed.

3. While turning slightly, slide press fitting onto tubing to the marked depth.The end of tubing must contact stop.

4. Open the jaw and place at right angles on the fitting.

5.Start pressing process and hold the trigger until the jaw has engaged the fittings.

 
6. Pressing tool and jaws:

 
7. Insertion Depth Chart:

 
8. Recommendations:

Fada Bronze Press Female Adapter, Press x FPT

Fada Bronze Press Male 90°Elbow, Press x MPT

Fada Bronze Press Female 90°Elbow, Press x FPT

Fada Bronze Press Tee, Press x FPT

9. Frequently Asked Questions:

Q: What is press fitting technology?

A: Press fitting technology is a mechanical, solder-less method of tubing joining. No torches or solvents are required to make the permanent water-tight seal. This was introduced in the United States in 1995.