1.Connection Introduction:

The press-to-connect method offer a quick and easy, flameless connection to copper pipes. Simply applying Pressure from a Press tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds with no flame, solder or flux. And also allows installers to join wet connections, making it the fastest solution for maintenance and repair. Adaptable for any commercial, industrial or residential application, whether new or retrofit.

2.Product Specification: 

3.Material Chemical Composition

4.Accessory:

Leak detect EPDM O-ring

5.Installation Instruction:

1.Cuter tube square using a tube cutter on fine tooth saw.

2.Deburring tube ID and OD with file.

3.Check seal for correct fit. Do not use oils or lubricants.

4.Mark proper insertion depth for well sealed.

5.While turning slightly, slide press fitting onto tubing to the marked depth. Note: End of tubing must contact stop.

6.Open the jaw and place at right angles on the fitting.

7.Start pressing process and hold the trigger until the jaw has engaged the fittings.

6. Pressing tool and jaws:

7. Recommendations:

Fada Bronze Press Male Adapter, Press x MPT

Fada Bronze Press Male 90°Elbow, Press x MPT

Fada Bronze Press Female 90°Elbow, Press x FPT

Fada Bronze Press Tee, Press x FPT

8. Frequently Asked Questions:

Q: What does EPDM stand for?

A: Ethylene-Propylene Diene Monomer

Q: What are the most common errors made when installing s Press Fittings?

A: Not adequately deburring the end of the tubing, and not inserting the tube far enough into the press fitting.